序号 |
论文题目 |
刊物名称 |
发表日期 |
刊物级别 |
1 |
Non-integer-period Motion Generation of A Planar Four-bar Mechanism Using Wavelet Series |
Mechanism and Machine Theory |
2018/1/1 |
SCI |
2 |
Wavelet Feature Parameters Representations of Open Planar Curves |
Applied Mathematical Modelling |
2018/1/1 |
SCI |
3 |
Synthesis of Spherical Four-bar Linkage for Open Path Generation Using Wavelet Feature Parameters |
Mechanism and Machine Theory |
2018/5/18 |
SCI |
4 |
An Adaptive Bioinspired Foot Mechanism Based on Tensegrity Structures |
SOFT ROBOTICS |
2019/1/1 |
SCI |
5 |
Digital image correlation to analyze slip state of tire tread block in the cornering condition |
OPTIK |
2019/3/7 |
SCI |
6 |
An improved bat algorithm and its application in multi-level image segmentation |
Journal of Intelligent & Fuzzy Systems |
2019/7/1 |
SCI |
7 |
A New Approach to Decoupled Non-Resonant Polishing |
Micromachines |
2019/7/18 |
SCI |
8 |
A multi-level image thresholding approach using Otsu based on the improved invasive weed optimization algorithm |
Signal, Image and Video Processing |
2019/10/1 |
SCI |
9 |
Improved Hybrid Bat Algorithm with Invasive Weed and Its Application in Image Segmentation |
Arabian Journal for
Science and Engineering |
2019/10/1 |
SCI |
10 |
Design and Analysis of a Chinese Medicine Based Humanoid Robotic Arm Massage System |
APPLIED SCIENCES-BASEL |
2019/10/12 |
SCI |
11 |
Grasshopper optimization algorithm with principal component analysis for global optimization |
The Journal of
Supercomputing |
2019/12/1 |
SCI |
12 |
Influence of anisotropy of nickel-based single crystal superalloy in atomic and close-to-atomic scale cutting. |
Precision Engineering |
2020/1/1 |
SCI |
13 |
High-speed 3D digital image correlation for rolling deformation of a tire sidewall and measuring dynamic contact patch length |
APPLIED OPTICS |
2020/2/7 |
SCI |
14 |
Modified hybrid bat algorithm with genetic crossover operation and smart inertia weight for multilevel image segmentation |
Applied Soft Computing |
2020/5/1 |
SCI |
15 |
Design and Analysis of a Wearable Upper Limb Rehabilitation Robot with Characteristics of Tension Mechanism |
APPLIED SCIENCES-BASEL |
2020/5/10 |
SCI |
16 |
A New Algorithm for Traveling Salesman Problems Based on Negative Feedback Ant Colony Algorithm Supervised by 2-Optimization |
APPLIED SCIENCES-BASEL |
2020/8/1 |
SCI |
17 |
Design and Analysis of a Flexible, Elastic, and Rope-Driven Parallel Mechanism for Wrist Rehabilitation |
Applied Bionics and Biomechanics |
2020/9/12 |
SCI |
18 |
A novel industrial image contrast enhancement technique based on an improved ant lion optimizer |
Arabian Journal for
Science and Engineering |
2020/11/1 |
SCI |
19 |
A Hybrid Grasshopper Optimization Algorithm With Invasive Weed for Global Optimization |
IEEE Access |
2020/11/1 |
SCI |
20 |
Theoretical calculation and analysis of new rare earth cemented carbide based on First-principles |
International Journal of Refractory Metals and Hard Materials |
2021/1/1 |
SCI |
21 |
Research on Deformation Mechanism of Cutting Nickel-Based Superalloy Inconel718 Based on Strain Gradient Theory |
Journal of Manufacturing Science and Engineering -Transactions of The ASME. |
2021/1/1 |
SCI |
22 |
Study on staged work hardening mechanism of nickel-based single crystal alloy during atomic and close-to-atomic scale cutting |
Precision Engineering |
2021/1/1 |
SCI |
23 |
Two-Dimensional Vibration Actuated Polishing of Small Surfaces by Generating Random-like Lissajous Trajectories |
Applied Optics |
2021/1/22 |
SCI |
24 |
Design and Analysis of Shoulder Joint Exoskeleton Rehabilitation Mechanism Based on Gear and Rack Transmission |
AIP Advances |
2021/5/1 |
SCI |
25 |
High-speed 3D digital image correlation for measuring tire rolling resistance coefficient |
MEASUREMENT |
2021/5/1 |
SCI |
26 |
Cutting Force Prediction Model for Elliptical Vibration Cutting SiCp/Al Based on Three-Phase Friction Theory |
Applied Sciences |
2021/11/14 |
SCI |
27 |
Obstacle Capability of an Air-Ground Amphibious
Reconnaissance Robot with a Planetary Wheel-Leg Type
Structure |
Hindawi Applied Bionics and Biomechanics |
2021/11/18 |
SCI |
28 |
Cutting deformation mechanism of SiCp/Al composites based on strain gradient theory. |
Journal of Materials Processing technology |
2022/1/1 |
SCI |
29 |
Modeling and experimental study of tire deformation characteristics under high-speed rolling condition |
Polymer Testing |
2022/2/8 |
SCI |
30 |
Secrecy Enhancement for SSK-Based Visible Light Communication Systems |
Electronics |
2022/3/1 |
SCI |
31 |
Design of a New Foot Structure Based on the Mast-type Octahedral Tensegrity Structure |
Mechanism and Machine Theory |
2022/7/1 |
SCI |
32 |
Path synthesis of a spherical five-bar mechanism based on a numerical atlas method |
Journal of the Brazilian Society of Mechanical Sciences and Engineering |
2022/10/25 |
SCI |
33 |
Design of Longitudinal–Torsional Transducer and DirectivityAnalysis during Ultrasonic Vibration-Assisted Milling of Honeycomb Aramid Material |
Micromachines |
2022/12/6 |
SCI |
34 |
Free-Form Surface Partitioning and Simulation Verification Based on Surface Curvature |
MDPI Micromachines |
2022/12/7 |
SCI |
35 |
Kinematics simulation analysis of six-degree-of-freedom loading and unloading robot based on ADAMS |
2018 7th International Conference on Sustainable Energy and Environment Engineering |
2019/1/11 |
EI |
36 |
竞争失效的刀具可靠性评估模型 |
吉林大学学报 |
2019/6/1 |
EI |
37 |
Microstructures and Properties of Friction Stir Welded Al-Cu Lap Joints |
Materials Science Forum |
2019/5/6 |
EI |
38 |
Kinematics analysis of 7-DOF upper limb rehabilitation robot based on BP neural network |
2020 IEEE 9th Data Driven Control and Learning Systems Conference |
2020/9/20 |
EI |
39 |
Temperature control system of hot extrusion equipment based on fuzzy control |
IEEE |
2020/12/28 |
EI |
40 |
碳化硅增韧氧化铝基陶瓷刀具切削Inconel718 合金的刀具界面行为研究 |
中国机械工程 |
2021/1/1 |
EI |
41 |
SiCp/2024Al复合材料高应变率热变形行为的新本构模型 |
中国机械工程 |
2021/1/1 |
EI |
42 |
An iterative learning algorithm based on RBF neural network in upper limb rehabilitation robot |
2021 IEEE 10th Data Driven Control and Learning Systems Conference |
2021/5/14 |
EI |
43 |
Sliding Mode Control Algorithm of Upper Limb Exoskeleton Rehabilitation Robot Based on RBF Neural Network |
2021 11th International Conference on Intelligent Control and Information Processing |
2021/10/3 |
EI |
44 |
绳索驱动腕部并联康复机构设计与逆运动学分析 |
机械工程学报 |
2022/3/10 |
EI |
45 |
单晶硅超声振动辅助切削亚表面裂纹损伤检测算法 |
吉林大学学报(工学版) |
2022/5/1 |
EI |
46 |
仿蝗虫跳跃机器人起跳阶段钢柔耦合分析与研究 |
《机械设计与制造》 |
2018/3/8 |
核心 |
47 |
基于ADAMS的六足仿生机器人结构设计及运动仿真 |
机械传动 |
2018/3/15 |
核心 |
48 |
基于最小二乘支持向量机的精密数控机床热误差建模与
补偿研究 |
机床与液压 |
2018/10/2 |
核心 |
49 |
基于差压技术的砂轮磨损量检测研究 |
机床与液压 |
2019/1/28 |
核心 |
50 |
磨床砂轮轮廓磨损在线检测技术研究 |
制造业自动化 |
2019/7/25 |
核心 |
51 |
基于汽车塑料燃油箱耐火性能试验的万能油箱夹具设计 |
机械设计 |
2020/3/20 |
核心 |
52 |
交变载荷下液压缸非线性动态特性的数值分析方法 |
液压与气动 |
2020/8/15 |
核心 |
53 |
采用改进卡尔曼滤波器PID控制的液压可变气门运动轨迹 |
中国工程机械学报 |
2020/10/15 |
核心 |
54 |
新工科背景下智能制造虚拟仿真实训教学平台建设与应用 |
实验技术与管理 |
2020/10/15 |
核心 |
55 |
基于张拉整体结构的仿生膝关节机构设计 |
机械传动 |
2020/12/15 |
核心 |
56 |
汽车塑料燃油箱耐火性能实验装置中机械手臂逆解分析 |
机械设计 |
2021/1/20 |
核心 |
57 |
光栅分层结构铝膜塑变应力传递规律研究 |
制造技术与机床 |
2021/7/1 |
核心 |
58 |
基于半球壳式导流体无阀微型压电泵的3D打印机挤出机构设计 |
机械设计 |
2021/7/20 |
核心 |
59 |
精密数控机床移动轴误差综合建模 |
机床与液压 |
2021/10/5 |
核心 |
60 |
智能化技术在机械工程中的应用 |
环球市场信息导报 |
2018/1/1 |
省级 |
61 |
机械制造与自动化节能设计理念探讨 |
科技资讯 |
2018/1/1 |
省级 |
62 |
人工智能中的图像识别技术探讨 |
科技资讯 |
2018/1/1 |
省级 |
63 |
创客教育背景下高校创新人才培养途径探究 |
智库时代 |
2018/1/1 |
省级 |
64 |
DELMIA环境下汽车冲压自动线仿真 |
长春工业大学学报 |
2018/10/15 |
省级 |
65 |
基于Fluent的热风焊热熔机构中多出风口风速平衡的结构设计 |
机械工程师 |
2018/11/10 |
省级 |
66 |
汽车纵梁加强板冲压自动线结构设计 |
现代商贸工业 |
2018/11/14 |
省级 |
67 |
刀具交流磁化处理装置 |
长春工业大学学报 |
2019/4/9 |
省级 |
68 |
基于汽车安全气囊生产线MES系统的开发与研究 |
现代制造技术与装备 |
2020/3/1 |
省级 |
69 |
农业机械自动化控制技术应用分析 |
广东蚕业 |
2020/5/1 |
省级 |
70 |
隐式结构可靠性灵敏度分析 |
长春工业大学学报 |
2020/5/1 |
省级 |
71 |
商用车楔式制动器总成建模及有限元分析 |
长春工业大学学报 |
2020/6/15 |
省级 |
72 |
机械专业教学中培养工程思维的思考 |
教学方法创新与实践 |
2020/8/1 |
省级 |
73 |
基于梯度搜索法的非线性结构可靠性分析方法 |
兵工学报 |
2021/1/1 |
省级 |
74 |
基于激光三角法的砂轮磨损量检测 |
长春工业大学学报 |
2021/3/2 |
省级 |
75 |
制动鼓热-结构耦合特性分析 |
长春工业大学学报 |
2021/4/15 |
省级 |
76 |
基于拉曼光谱技术的柴油机微粒微观结构特性研究 |
长春工业大学学报 |
2021/4/15 |
省级 |
77 |
柴油机微粒氧化特性及其化学反应动力学研究 |
长春工业大学学报 |
2021/6/15 |
省级 |
78 |
汽车塑料燃油箱耐火性能检测装置结构设计与分析 |
工程与试验 |
2021/6/15 |
省级 |
79 |
浅析内燃机车电机传动轴机械振动产生的原因及解决方案 |
教育学刊 |
2021/11/1 |
省级 |
80 |
基于图像处理的激光点图像去噪预处理研究 |
电脑校园 |
2022/10/18 |
省级 |
